D-Link DCS-2332L User Manual
13
D-Link DCS-2332L User Manual
Section 1: Product Overview
Removing the Bottom Panel
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Philips #00 Screwdriver.
Step 4:
Lift off the protective panel.
If you need to install an SD Memory Card please skip to "Installing an SD Memory Card" on
If you need to install an SD Memory Card please skip to "Installing an SD Memory Card" on
Using the Reset Button
Step 1:
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset
the device to it's factory settings.
Step 3:
2
2
3
4
4
If you need to use the Reset Button follow these steps.