D-Link DCS-2332L User Manual

15

D-Link DCS-2332L User Manual

Section 1: Product Overview

LENS

IR LIGHT

WPS LED

LIGHT SENSOR

MIC

POWER LED

PIR

RJ45

SPEAKER

ATENNA

DC JACK

WPS SW

RESET SW
MICRO SD

DCS-2332L

Attach the Antenna

Locate the antenna included with your DCS-2332L, and attach it to the antenna 

connector located on the side of the DCS-2332L.

Press and hold the WPS button for approximately 5-6 seconds. The blue WPS 

status LED on the front panel will blink.

Within 60 seconds press the WPS button on your router. On some routers, you 

may need to log in to the web interface and click on an on-screen button to 

activate the WPS feature. If you are not sure where the WPS button is on your 

router, please refer to your router’s User Manual.

The DCS-2332L will automatically create a wireless connection to your router. 

While connecting, the status LED will flash. When the connection process is 

complete, the status LED will turn solid.

Note: If your router does not support WPS, you can still use the wired connection 

method on the previous page. After Zero Configuration setup is complete, your 

router's wireless settings will be automatically transferred to the camera.

Alternatively, if your router supports WPS, you can use the WPS button on the 

camera to easily create a secure wireless connection to your network.