Brother MFC-4350 Owner's Manual
41
S E T U P R E C E I V E
Setting F/T Ring Time
You must determine how long the MFC will notify you with its special
double ring when you have a voice call. This ringing happens after the
initial ringing from the phone company. Only the MFC rings, for 20, 30, 40
or 70 seconds; no other phones on the same line ring the special double
ring. However, you can also answer the call on any extension phone on the
same phone number as the MFC.
double ring when you have a voice call. This ringing happens after the
initial ringing from the phone company. Only the MFC rings, for 20, 30, 40
or 70 seconds; no other phones on the same line ring the special double
ring. However, you can also answer the call on any extension phone on the
same phone number as the MFC.
1
Press
Function
,
1
,
2
,
2
.
2
Press
or
to select how long the MFC will ring to alert you that
you have a voice call.
3
Press
Set
when the screen displays your selection.
RING TIME:20 SEC
4
Press
Stop
to exit.
Now, when a call comes in and the MFC is set to FAX/TEL Mode, all
phones on this line will ring the number of times you selected in Ring
Delay.
phones on this line will ring the number of times you selected in Ring
Delay.
You can let the MFC pick up and detect if it’s a fax or voice call. If it’s a fax
call, the MFC prints the fax. If it’s a voice call, the MFC signals you with a
double ring for the length of time you selected in F/T Ring Time.
call, the MFC prints the fax. If it’s a voice call, the MFC signals you with a
double ring for the length of time you selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the MFC continues
ringing for the set time.
ringing for the set time.
Record FAX/TEL Outgoing Announcement (F/T OGM)
(For MFC 6650MC Only)
(For MFC 6650MC Only)
This is the announcement played by your MFC (not an external TAD) when
someone calls and your MFC is set to FAX/TEL mode. Although callers hear your
announcement, they cannot leave a message. To erase the announcement, follow
the directions on page 96. “Erasing Outgoing Message.”
someone calls and your MFC is set to FAX/TEL mode. Although callers hear your
announcement, they cannot leave a message. To erase the announcement, follow
the directions on page 96. “Erasing Outgoing Message.”
1
Press
Function
,
1
,
8
,
3
. The screen prompts you to choose F/T OGM
or MSG CTR OGM.
2
Press
or
to select F/T OGM.
3
Press
Set
.
4
Press
Record
, then pick up the handset to record a message.
5
Replace the handset. Your OGM is played.
6
Press
Stop
to exit.