Brother MFC-4350 Owner's Manual

S E T U P   A U T O   D I A L   N U M B E R S

Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 34 to help you enter letters—OR—Press 

Set

 and go to

Step 8 to store the number without a name.

Press 

Set

.

The screen prompts you to select the type of number this is. Use 

 or 

to select the type you want.

a fax number

a telephone (voice) number

FAX/TEL both fax and telephone number

Press 

Set

.

Return to Step 2 to store another Speed Dial number—OR—Press 

Stop

 to exit.

Even if you lose electrical power, numbers stored in memory will not be
lost.

If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either

Press 

1

 to change the number stored, or press 

2

 to exit without making a

change.

Enter a new number.

■

If you want to erase the number, press 

Clear

 when the cursor is to the left

of the digits.

■

If you want to change a digit, use 

 or 

 to position the cursor under

the digit you want to change, then type over it.

Follow the directions from Step 4 in Storing One Touch Numbers, or Step 5
in Storing Speed Dial Numbers.

Groups allow you to send the same fax message to many fax numbers by pressing
only one One Touch Group key (and 

Start

). First, you’ll need to store each

fax number as a One Touch or Speed Dial number. Then, you can combine
them into a Group.  Each Group uses up a One Touch key. Finally, you can
have up to six small Groups, or you can assign up to 123 numbers to one
large Group.