Brother MFCP-2000 Owner's Manual

USER’S GUIDE

7-10

This section contains questions and answers for using your machine. If
you have encountered a problem, find the question relating to your
problem and take the steps recommended to correct the problem.

The machine does not work.
All lamps are off.

The machine may be in sleep mode. Press the panel

 to wake up the machine. Check to see if the

machine is plugged into a live power source and the

 

 is on.

The machine does not print.

Check the following:

 The machine is turned on.

 All of the protective parts have been removed.

 The toner cartridge and drum unit are installed

properly.

 The interface cable is securely connected between

the machine and computer.

 Check to see if the 

 lamp is blinking. If the

lamp is blinking, refer to the Operator Call section
of this manual.

 Check to see if the 

 lamp is blinking. If the

lamp is blinking fast, the machine might be
cooling down to lower the machines internal
temperature. Open the top cover of the machine to
lower the temperature.

I cannot print from my
application software.

Make sure the supplied Windows printer driver is
installed and selected with your application software.

Sometimes I get a Memory
Full message.  How can I
correct this?

Reduce the print resolution or reduce the complexity
of your document and try again.

Sometimes I get a Print
Overrun error when printing
certain documents from
Windows.

 If you are using the supplied Windows driver, turn

error recovery on in the Setup dialog box and try
again.

Reduce the print resolution or reduce the complexity
of your document and try again.