Brother MFCP-2000 Owner's Manual
USER’S GUIDE
7-12
Paper Handling
Question
Recommendation
The machine does not load
paper.
paper.
Check to see if the “
PAPER EMPTY
” message
appears on your computer screen or the
Alarm
and
Paper
lamps are blinking on the machine
control panel. If so, the multi-purpose sheet feeder
may be out of paper or not properly installed. If it
is empty, load a new stack of paper into the
feeder.
may be out of paper or not properly installed. If it
is empty, load a new stack of paper into the
feeder.
If there is paper in the multi-purpose sheet feeder,
make sure it is straight. If the paper is curled, you
should straighten it before printing. Sometimes it
is helpful to remove the paper, turn the stack over
and put it back into the paper tray.
should straighten it before printing. Sometimes it
is helpful to remove the paper, turn the stack over
and put it back into the paper tray.
Reduce the amount of paper in the multi-purpose
sheet feeder, then try again.
How can I load envelopes?
You can load envelopes from either the multi-purpose
sheet feeder or the manual feed slot. Your application
software must be set up correctly to print on the
envelope size you are using. This is usually done in
the page setup or document setup menu of your
software. Refer to your application manual.
sheet feeder or the manual feed slot. Your application
software must be set up correctly to print on the
envelope size you are using. This is usually done in
the page setup or document setup menu of your
software. Refer to your application manual.
What paper can I use?
You can use plain paper, envelopes, transparencies,
labels, and organizer paper. For information on
loading paper,
labels, and organizer paper. For information on
loading paper,
How can I clear paper jams?