Brother MFCP-2000 Owner's Manual

USER’S GUIDE

7-14

The machine does not copy.

Check the following;

 The machine is turned on.

 All of the protective parts have been removed.

 The top cover is closed.

 The 

 LED is blinking. If the LED is

blinking, refer to the Operator Calls section of this
manual.

The machine copies, but
nothing is printed on the copy.

check if;

 Original documents are inserted face down in the

document feeder.

 The toner cartridge is not empty.

Copy has a vertical line.

Clean the scanning unit refering to ‘Cleaning the

Scanning Unit’ section in Chapter 6.

Some portion of the image is
missing on the copy.

 The machine has unscannable and unprintable

areas. Check the areas in Chapter 2.

 If the image is larger than the paper size, it may be

lost.

Memory full error.

 A DOS application is using download fonts and

the memory is almost full.

 After a memory full error occurs, the machine

clears any downloaded fonts automatically.

The machine does not scan

Check the following;

 The machine is turned on.

 All of the protective parts have been removed.

 The top cover is closed.

Computer indicates an error
message other than above.

Check the following;

 The machine is connected directly to the

computer.

 The computer can work in bi-directional mode.

 The scanner port is correctly set on your

computer.

 The Scanner driver is correctly selected in your

application.

 A recommended interface cable is being

used.(IEEE 1284 compliant)

Scanned image has vertical
white or black line.

Clean the scanning unit.