Bosch Appliances Computer Monitor UML-273-90 User Manual
Connecting the Y/C (S-Video) Signal to the
Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C)
input (refer to Rear Panels, page 20) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ohm.
input (refer to Rear Panels, page 20) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ohm.
Figure 5.1: Y/C Connector pin-out
Number
Input
1
Ground
2
Ground
3
Y-signal
4
C-signal
Connecting Audio to the Monitor
There are three (3) set of stereo audio connectors for audio
inputs, located on the rear panel.This audio inputs are not
associated with any input terminals on the rear panel, and can
be freely connected to any audio input.
inputs, located on the rear panel.This audio inputs are not
associated with any input terminals on the rear panel, and can
be freely connected to any audio input.
Connecting the PC Signal to the Monitor
There are three ways to connect the PC signal to the monitor:
HDMI, DVI, and VGA.
HDMI, DVI, and VGA.
HDMI Connection
The monitor can be connected to the HDMI (High Definition
Multimedia Input) by connecting a HDMI cable (not supplied).
Multimedia Input) by connecting a HDMI cable (not supplied).
5.4
5.5
5.6
5.6.1
30
en | Installing the Monitor
Bosch High Performance
HD LED Monitors
2013.02 | 3.0 |
Installation Manual
Bosch Security Systems, Inc.