Wacom Graphire - 3 for Windows & Macintosh User Manual

Page  48

2.

Check the pen. 

•

Move your pen across the active area of the tablet; the screen cursor should move in the corresponding 
direction on your monitor.

•

Press the pen tip against the surface of the tablet.  The tablet status LED should turn from orange to green.

•

Next, without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0.20 inch) of the 
tablet surface and press the side switch.  The status LED should again change from orange to green.

•

Turn the pen over and press the eraser against the surface of the tablet; the status LED should change from 
orange to green.

•

Move the Cordless Mouse across the active area of the tablet; the screen cursor should move in the 
corresponding direction on your monitor.

•

Test the buttons on your Cordless Mouse by clicking each button.  The tablet’s status LED should turn green 
when a button is pressed.  If not, you may have a defective Cordless Mouse or tablet.  See