Wacom Graphire - 3 for Windows & Macintosh Manuale Utente
Page 48
2.
Check the pen.
•
Move your pen across the active area of the tablet; the screen cursor should move in the corresponding
direction on your monitor.
direction on your monitor.
•
Press the pen tip against the surface of the tablet. The tablet status LED should turn from orange to green.
•
Next, without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0.20 inch) of the
tablet surface and press the side switch. The status LED should again change from orange to green.
tablet surface and press the side switch. The status LED should again change from orange to green.
•
Turn the pen over and press the eraser against the surface of the tablet; the status LED should change from
orange to green.
orange to green.
3. Check the Cordless Mouse.
•
Move the Cordless Mouse across the active area of the tablet; the screen cursor should move in the
corresponding direction on your monitor.
corresponding direction on your monitor.
•
Test the buttons on your Cordless Mouse by clicking each button. The tablet’s status LED should turn green
when a button is pressed. If not, you may have a defective Cordless Mouse or tablet. See
when a button is pressed. If not, you may have a defective Cordless Mouse or tablet. See