Mercury PR0091 User Manual
Mercury 6-5 Stat – Installation & User Guide
Recommended set-up method
If you are not connecting to a network and want to set up the controller through the buttons we recommend
you use the following order from the function menu.
rtc. Real time clock (This will automatically synchronise on network systems)
a. Use the up or down buttons to scroll through the display until the display reads “rtc”
b. Press enter. The display will show “t-1”. press enter again
c. Scroll hours up or down (0 – 23) press enter
d. Use up button to select “t-2”, press enter
e. Scroll minutes up or down (0 – 59) press enter
f.
b. Press enter. The display will show “t-1”. press enter again
c. Scroll hours up or down (0 – 23) press enter
d. Use up button to select “t-2”, press enter
e. Scroll minutes up or down (0 – 59) press enter
f.
Repeat for t-3
(seconds 0 – 59)
g. Repeat for t -4
(Days up to 31)
h. Repeat for t -5
(months up to 12)
i.
Repeat for t -6
(Year up to 99)
j.
Use up button to display “ESC”, press enter to display “rtc”
Time clock is now set
type. view controller type
The controller Type is preset at the factory and cannot be changed.
a. From the function menu scroll to select type, press enter
b. View the type number 1
c. Press
b. View the type number 1
c. Press
enter.
d. Scroll to select “ESC”
e. Press
e. Press
enter
PArA. Set/view parameters (This can be achieved at the network front end)
a. From the function menu scroll to select PArA
Ensure that all power is
b. Pressing Enter while PArA is displayed will enter the parameter menu. The first parameter option
will be displayed as P-01. Pressing the Up or Down button will present the other parameter
options P-02, P-03 etc. See the parameter list below to find what parameter number corresponds
to which actual parameter. Pressing the Enter button will show the current value of the selected
parameter. Press Up or Down to modify the value and press Enter again to save the value. The
parameter list number will be displayed again. Two other options are present in the parameter
menu – dFLt and ESC. Selecting ESC will exit setup mode. Selecting dFLt will reset all
parameters back to the default values for the current type of controller.
options P-02, P-03 etc. See the parameter list below to find what parameter number corresponds
to which actual parameter. Pressing the Enter button will show the current value of the selected
parameter. Press Up or Down to modify the value and press Enter again to save the value. The
parameter list number will be displayed again. Two other options are present in the parameter
menu – dFLt and ESC. Selecting ESC will exit setup mode. Selecting dFLt will reset all
parameters back to the default values for the current type of controller.
switched off before
installing or maintaining
this product
installing or maintaining
this product
Revision 1.2
Page 6 of 21