LG Conference Phone AVS2400 User Manual
Preparation
11
2
P
repar
ation
ation
NOTE
OSD lock / unlock function
You can lock the current control settings, so that they cannot be inadvertently changed.
1. Press and hold the MENU button for several seconds. The message “OSD LOCKED” should appear.
2. You can unlock the OSD controls at any time by holding the MENU button for several seconds. The message “OSD
You can lock the current control settings, so that they cannot be inadvertently changed.
1. Press and hold the MENU button for several seconds. The message “OSD LOCKED” should appear.
2. You can unlock the OSD controls at any time by holding the MENU button for several seconds. The message “OSD
UNLOCKED” should appear.
i
Monitor power button: Turns the monitor on and off. The camera and system power are not turned off by the monitor
power button. You can turn the camera and system power off by using the Main power switch.
power button. You can turn the camera and system power off by using the Main power switch.
Rear of the VCS
j k
l m
n o
p
q r
s
j Power cord Inlet (AC IN): Connects the power plug.
k
Main power switch: Turns the unit on and off. You must turn the unit on using the main power switch after
connecting the power cable. You can use this button to reset the system.
l LAN port: Connects the LAN cable for this system.
m PC (LAN) port: Connects the LAN cable between the VCS and your PC.
n HDMI port: Connects the VCS and the PC with a HDMI cable.
o D-SUB port: Connects the VCS and the PC with the D-SUB cable.
p Speaker set: Two speakers are built-in.
q Microphone jack: Connects an external microphone.
r Headphone jack: Connects an external speaker device.
s LOCK: Connects the Kensington security system cable between the VCS and a large object such as a desk.