LG Conference Phone AVS2400 User Manual

58

Operation

4

Oper

ation

2.   Enter the number you wish to call. The last manually entered number appears by default. To edit the number, use the 

following keys:

•  The 

 button behaves as the backspace.

•  The 

 button displays the keyboard from which you can enter alphanumeric characters. Use the arrow keys to 

navigate to the character you wish to enter and press OK.

•  The 

 button changes the text entry method (indicated at the bottom of the screen).

The 0x1a option enables you to enter an IPv6 address when your system is connected to an IPv6 network. If IPv6 
addressing is enabled on your system, the IPv6 address of the system appears on the System Information page in 
the System Menu. If you enter an IPv6 address, the system you are calling must support IPv6 addressing for the call 
to connect.

•  Press OK to exit the field.

3.  Navigate to the list that appears next to the entry box for numbers and choose a value for the maximum bandwidth for 

the call. Press OK to access the list, use the arrow keys to select a value, and press OK again to save your selection. (The 
selected bandwidth value can affect the quality of the call. Select the proper bandwidth for the network environment of 
the far end system. The default value is Auto.).

4.   Press the call 

 button to dial the number.

To dial a voice number manually from the main screen, follow these steps:
1.   Use the arrow keys on the remote control to select Voice Call and press OK.
2.   Enter the number you wish to call. The last manually entered number appears in this field by default. To edit the number, use 

the following keys:

•  The 

 button changes the text entry method (indicated at the bottom of the screen).

•  The 

 button behaves as the backspace.

•  The 

 button displays the keyboard from which you can enter alphanumeric characters. Use the arrow keys to 

navigate to the character you wish to enter and press OK.

3.   Press the call 

 or OK button to place the call.

You can configure your system to automatically answer incoming calls by setting preferences in User Preferences : Calls menu 
as follows:
•  Auto Answer: If it is set to Enabled, the system automatically answers the first incoming call. If set to Disabled (the default), 

you must manually answer incoming calls. 
If your system is configured for answering calls manually, choose one of the following options when an incoming call arrives:

 - Select Answer and press OK to accept the call.
 - Select Ignore and press OK to reject the call.

•  Auto Answer Mute: If it is set to Enabled (the default), and the Auto Answer preference is set to Enabled, the system is muted 

when a call connects.