Monogram ZEU36RSJSS Installation Instruction

Installation Instructions

INSTALLING THE JUNCTION BOX

Install an approved junction box where it will be

easily reached through the front of the cabinet

where the cooktop will be located. The cooktop

conduit is 4 feet long.

IMPORTANT:

The junction box must be

located where it will allow considerable slack in

the conduit for serviceability.

INSTALLING THE COOKTOP

PROTECT SURFACE OF COOKTOP

Place a towel or tablecloth onto the countertop.

Lay the cooktop upside down onto the protected

surface.

ATTACH FOAM TAPE

Apply the foam tape around the outer edge of the

glass. Do not overlap the foam tape.

Note: On ZEU36 model, apply the foam tape

around the outer edge of the glass on the sides

and rear of the unit only.

Install junction box so

that it can be reached

through the front of the

cabinet.

16"

Min.

Bottom of cooktop

Cloth under Cooktop

Bottom of Cooktop

Foam Tape

Cooktop

Glass

LOCATE MOUNTING PARTS

Remove the hold down brackets and screws from

the literature package.

Screw the Hold Down Bracket to the side

of the cooktop unit. Repeat for opposite side of

cooktop.

Mounting Screw

Hold Down

Bracket

Pre-Drilled Hole

Bottom of Cooktop

Cooktop Glass

Foam Tape