Fire Magic 42VH6 Installation Instruction

REV 2 - 1406051400

L-C2-387

14

1.  Rest the vent hood onto the wall mount bracket, being 

sure that the tabs on the bracket engage the slots on 
the rear of the hood for proper support. See Fig. 14-1.

2.  Ensure the sides, top, and bottom of the vent hood sit 

fl ush with the spacer (see Fig. 14-2). (The spacer will 
already be fi nished with any applicable substrate, to 
allow for the vent hood to rest fl ush.)

3.  From the inside of the vent hood; fasten the hood to 

the bracket using a medium Phillips screwdriver and 
the 1/4-20 screws supplied with the vent hood (that 
were originally removed at beginning of installation). 
See Fig.14-2, Detail A.

4.  From the inside of the vent hood, using appropriate 

mounting hardware for the spacer construction; secure 
the top portion of the hood directly into the spacer. Use 
the supplied support plates when fastening, see Fig. 
14-2, Detail B.

Fire Magic spacers include these screws (#10 x 3/4").

Fig. 14-2 Secure vent hood (42" shown)

(grill not shown 

for clarity)

(Flush)

Fig. 14-1 Rest vent hood in place