Fire Magic 42VH6 Installation Instruction

REV 2 - 1406051400

L-C2-387

17

Fig. 17-3 Install fi lter spacer (if applicable)

Fig. 17-4 Install fi lters

Fig. 17-1 Align baffl e

Fig. 17-2 Secure baffl e

1.  Carefully raise the baffl e up into the vent hood. You will 

fi rst need to slide one side in at a slight angle, until the 
baffl e edge aligns above the inner wall (see Fig. 17-1). 
Then raise the opposite side of the baffl e until it also 
aligns. Drop the baffl e into place.

2.  Align the 4 screw holes (2 on each side), then secure  

the baffl e in place using a medium Phillips screwdriver 
and the supplied 8-32 x 3/8" screws (that were originally 
removed at beginning of installation). See Fig. 17-2.

Important:  To prevent cross-threading the screws they 

should be installed with a manual screwdriver 
and a small amount of household grease.

1.  Install the fi lter spacer (if applicable, 42" models only). 

See Fig. 17-3. Repeat for other side.

2.  Install a fi lter into the vent hood by fi rst pressing in the 

lever, then aligning the tabs found on the fi lter into the 
notches found in the interior of the hood. The fi lters 
will secure in place. Repeat for all fi lters. See Fig. 17-4.