Gaggenau AI230700 Installation Instruction

9

READ AND SAVE THESE INSTRUCTIONS

Be sure the entire appliance (including the grease 
filters and light bulbs, if applicable) has cooled and 
grease has solified before attempting to clean any 
part of the appliance.

Do not use steam cleaners to clean the appliance.

Do not repair, replace or remove any part of the 
appliance unless specifically recommended in the 
manuals. Improper installation, service or 
maintenance can cause injury or property damage. 
Refer to this manual for guidance. All other servicing 
should be done by a qualified technician.

Risk of injury
Items placed on the appliance may fall down. Do not 
place any objects on the appliance.

Risk of injury
The light emitted by LED lights is very dazzling, and 
can damage the eyes (risk group 1). Do not look 
directly into the switched on LED lights for longer 
than 100 seconds.

Have the installer show you the location of the circuit 
breaker or fuse. Mark it for easy reference.

This appliance must be properly installed and 
grounded by a qualified technician. Connect only to 
properly grounded outlet. Refer to Installation 
Instructions for details.

This appliance is intended for normal family 
household use only. It is not approved for outdoor 
use. See the Warranty. If you have any questions, 
contact the manufacturer.

Do not store or use corrosive chemicals, vapors, 
flammables or nonfood products in or near this 
appliance. It is specifically designed for use when 
heating or cooking food. The use of corrosive 
chemicals in heating or cleaning will damage the 
appliance and could result in injury.

Do not operate this appliance if it is not working 
properly, or if it has been damaged. Contact an 
authorized servicer.

Do not repair or replace any part of the appliance 
unless specifically recommended in this manual. Refer 
all servicing to a factory authorized service center.

Grease left on filters can remelt and move into the 
vent.

Turn power off at breaker before removing a damaged 
bulb. Do not touch the bulbs immediately after use. 
The bulbs will remain hot for several minutes.

Make sure the appliance and lights are cool and 
power to the appliance has been turned off before 
replacing the light bulb(s). Failure to do so could 
result in electrical shock or burns.The lenses (if 
equipped) must be in place when using the 
appliance.The lenses (if equipped) serve to protect 
the light bulb from breaking.The lenses (if equipped) 
are made of glass. Handle carefully to avoid breaking. 
Broken glass can cause an injury.

Hidden surfaces may have sharp edges. Use caution 
when reaching behind or under appliance.