Bosch NITP666UC Manual

14

You can use the timer function to set a cook time for any 

element. The element will turn off automatically once the 

set time has elapsed. 

9

▯

When using the timer, always keep an eye on the 

cooktop and do not allow anything to boil over or 

burn. Boilovers can cause smoke and foods and 

oils may catch on fire if left on high temperature 

settings.

▯

This function should not be used for long periods 

of time, especially at high heat settings. 

▯

Make sure the cooktop is turned off with the main 

power switch after each use.

Select the desired element and power level.

Touch the Timer key twice. The 

‹‹

, min and __ 

indicators light up on the timer display. The cook time 

indicator for the desired element lights up.

Within the next 10 seconds, set the required time 

using the number keys 1 to 9.

After a few seconds, the timer will start to count down.
The last programmed cook time will appear in the 

display.

Once the cook time has elapsed
The element turnes off once the set cook time has 

elapsed. You will hear a beep. The indicator 

‹

.

‹

 appears 

in the element display and the timer display shows 

‹‹

. 

Once you touch the Timer key, the indicators and the 

beep are turned off. 

Select the desired element.

Touch the Timer key twice. The 

r 

__ indicators light 

up.

Adjust the cook time using the number keys. To 

cancel cook time set the timer to 

‹‹

 by touching

the 0 key twice.

▯

If a cook time has been set the display always shows 

the time for this function. To check the remaining cook 

time for an element, select the element and touch the 

Timer key twice.

▯

If a cook time has been set for more than one element, 

the display shows the time for the selected element.

▯

You can set a cook time of up to 99 minutes.

Automatic timer
With this function you may select a cook time for all 

elements. Once an element is turned on, the selected 

time will begin to count down. The element will 

automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in 

the chapter "Basic settings".
Note:  The cook time can be changed or cancelled for 

any element:
Select the desired element and touch the Timer key 

twice. The remaining cook time for the element is 

displayed. Adjust the cook time using the number keys, 

or deactivate it by setting the the timer value to 

‹‹

.

The timer can be set for periods of up to 99 minutes. It is 

independent of the other settings. This function does not 

automatically switch off an element.

Touch the Timer key. 

‹‹

 appears in the timer display. 

The __, min and 

U

 indicators light up.

Set the required time using the number keys 0 to 9. 
After a few seconds, the __ indicator goes out and the 

programmed time starts to count down.

Once the time has elapsed
A beep sounds. 

‹‹

 and 

U

 indicators light up. Touch the 

Timer key. The indicators go out and the beep stops.

Changing the time
Touch the Timer key. The __ and 

U

 indicators light up. 

Change the time using the number keys 0 to 9.