Fagor 60CFG30B Installation Guide

 

10

 

 

 

 

 

 

  Switch on the power supply, and the backlight is on, displaying “24-hour system”. The 

output is then blocked, and the machine enters standby status. The backlight 
disappears automatically 30 seconds later under the condition of non-operation. 

  To set the clock first press and hold the “ ” indicator for 3 seconds, the first 2 digits will 

flash  

  and can be adjusted. Press the 

  key to increase the number, and the 

  key to decrease. 

  Press the timer key “ ” again and the last 2 digits will flash 

  and can be 

adjusted. Press the 

 key to increase, and the   

  key to decrease. 

  Press the timer key “ ” again and it will confirm the time setting and will also exit from 

this menu selection. 

 
C- Power Setting: 

The motor has 3 speeds: low, medium and high. 

 Press   key once, the 

  is displayed on the display screen, and the motor starts 

operation (low position) 

 Press    key once more at the low position, the 

  is displayed on the display 

screen (medium position). 

 Press    key once more at the medium position, the 

  is displayed on the 

display screen (high position).   

  To decrease speed press “ ” key once, the motor is adjusted to a lower position, and 

the LCD screen displays that position; the motor speed will be decreased until it 
reaches the off position 

 

 The 

control 

system

 provides the option to run the motor for a predetermined time 

period.  

  The time period can be adjusted to 3 different settings: 5 min; 15 min. or 30 min. 

  The different time period can be selected by pressing the timer setting    “ ”  in 

repetition until you reach the required period