Monogram ZDP486NDPSS Installation Instruction

30" to 36" Adjustable Height
Backsplash With Shelf
ZXADJB48PSS, for 48" wide ranges
ZXADJB36PSS, for 36" wide ranges
ZXADJB30PSS, for 30" wide ranges

12" High Backsplash
ZX12B48PSS, for 48" wide ranges
ZX12B36PSS, for 36" wide ranges
ZX12B30PSS, for 30" wide ranges

These Monogram ranges are factory set for either
natural gas or LP gas. Order the model for your
installation situation.

ZDP484NG – 4 gas burners, grill and griddle

ZDP486NR – 6 gas burners and grill

ZDP486ND – 6 gas burners and griddle

ZDP484LG – 4 gas burners, grill and griddle

ZDP486LR – 6 gas burners and grill

ZDP486LD – 6 gas burners and griddle

ZDP366N – 6 gas burners

ZDP364NR – 4 gas burners and grill

ZDP364ND – 4 gas burners and griddle

ZDP366L – 6 gas burners

ZDP364LR – 4 gas burners and grill

ZDP364LD – 4 gas burners and griddle

ZDP304N

ZDP304L

All models require 12" minimum clearance to a
vertical combustible surface at the rear. If clearance
is less than 12”, the entire surface of the back wall
above and the full width of the range must be
protected by a backsplash. The backsplash must be
constructed of non-combustible material, such as
metal, ceramic tile, brick, marble or other stone.

Two Backsplash Accessories Available:
• The 12" high stainless steel backsplash accessory 

is available. Use this backsplash in combination 
with a custom, non-combustible backsplash built 
beyond the 12” height. The combined height of 
the backsplash accessory and the custom 
backsplash must reach the bottom of a hood, 
or when there is no hood, to 48” above the 
cooking surface.

• An adjustable 30" to 36" high backsplash with 

shelf is also available. This backsplash fills in the 
space between the top of the range and the 
bottom of the hood. The shelf is positioned so that 
heat lamps from the bottom of a Monogram 
professional hood are directed towards the shelf.