Viking RVRF336SS Use & Care Manual

Page of 32
13
Controls
An indicator light will be illuminated above most active features.
Touch the icon   to activate the options below.
fast freeze  
Activates a faster rate for freezing food.
fast ice    
Increases the production of ice.
energy saver  
 Keep this switch set on energy saver (light on) for lowest energy usage. If 
moisture appears on the cabinet between the doors, pressing this button will 
turn the light off and enable an electric heater used to reduce moisture on the 
cabinet between the doors.
water fi lter  
Press and hold for three seconds to reset after fi lter change.
air fi lter    
 Filter condition status is always displayed when door is open. Press and hold 
for three seconds to reset after fi lter change.
temp mode    
Touch to toggle display from Fahrenheit to Celsius.
mute sounds  
 Tones emitted by each key press can be turned off based on user preference. 
The sounds are muted when the red indicator is lit. Warning signals will stay 
active.
default settings    Resets all refrigerator settings such as temp, temp display and tones  to their 
factory default settings.
on off    
 Press and hold for three seconds to turn off the cooling system to clean the 
refrigerator.  It also turns off the ice maker. The temperature displays will read 
OFF.
IMPORTANT
Pressing the 
power on/off
 icon does not turn off power to your refrigerator. You must 
unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.  The temperature dis-
play will begin to blink with the fi rst touch. The display will time out after 10 seconds and return 
to the basic display.
Alarms
Door Ajar  
 If the door has been left open for an extended period of time, an alarm will 
sound and the door ajar indicator will display on the bottom display of the 
control panel.  The alarm is turned off by closing the door. The mute sounds 
key will blink to prompt the reset of any active alarms. Press this key to reset 
any system alarms.
High Temp  
 In the event of a high temperature condition, the temperature display will blink 
and display “HI”. After 20 minutes, the alarm will sound and the high  temp 
indicator will be red on the bottom of the control panel. The mute sounds 
icon will illuminate until pressed, acknowledging the alarm, at which time the 
highest temperature reached will be displayed and the refrigerator will resume 
normal operation. In case the high temp alarm is not acknowledged at the fi rst 
alarm sound time out, when the door is fi rst opened, the alarm sound will be 
repeated.
Power Fail  
 In the event of a power failure, the power fail alert will be displayed and the 
temperature display will blink until the mute sounds icon is pressed, acknowl-
edging the alarm. Other modes may be turned off until the alarm is acknowl-
edged. The power fail alert is turned off and the refrigerator will resume 
normal operation. The high temp alarm may also be illuminated until a safe 
operating range temperature has been reached.