Blomberg DWT25200SSWS Quick Setup Guide

17 9129 01 00-AB

Turn the dishwasher on with the On/Off button. When turning on, 

the icon on the display module of the last used program will light up.

Use the Program Selection button to select the desired program. 

The icon of the corresponding program will light up.

Refer to “Table of Programme Data and Average Consumption 

Values” to select a programme suitable for your dishes. Select the 

desired programme with programme selection button.

You can follow up the step while current program is running from 

the Program Steps follow up indicator (

15) 

a Washing Step Indicator 15 a

b Drying Step Indicator 15 b

c End of Program Indicator 15 c

The display shows the steps for washing 

15 a and drying 15 b, 

respectively, while the selected program is running. Only the End 

of Program indicator 

15 c lights up when the program is over. 

Remaining Time Indicator 

3 displays “0:00”.

Half Load/Tablet Detergent Button allows you to turn on and off the 

Half Load and Tablet Detergent functions of your machine.

Use this button to start the selected program. When the button is 

pressed once, the light on the button will turn on.

Stop the program with the Start/Pause/Cancel button.

You can follow the remaining program duration from the time 

indicator display.

This option enables you to start the selected program with a delay 

of 0,5 to 9,5 hours.

1. Delay time is adjusted by pressing the Time Delay button (press 

several times).

2. After adjusting the delay time, press the Start/Pause/Cancel 

button.

3. Close the door. At the end of the delay set, the program starts 

automatically.

During a wash program the Time Delay option does not function.

To cancel a program while the dishwasher is running:

1. Open the door gently.

2. Press and hold Start/Pause/Cancel button for 3 seconds. The 

indicator light will start flashing.

3. Close the door.

4. The dishwasher will drain the water inside the machine for 1 

minute. At the end of the cycle, the end of program indicator will 

light up. You can choose and start a new program.

If this indicator light comes on, you need to refill rinse aid.

You can also tell whether rinse aid must be refilled by looking at the 

rinse aid dispenser. When the visual fill indicator is dark, there is 

enough rinse aid in the dispenser.

When the color is light, open the dispenser and refill rinse aid.

 

To change the program selection while the dishwasher is running:

1. Open the door. 

2. Press Start/Pause/Cancel and select a new program.

3. Press Start/Pause/Cancel again, to start.

 

When this indicator light comes on, you must refill special salt. Only 

use special dishwasher salt in your machine to soften the water.

The salt content can be read on the container for the salt. When the 

visual fill indicator is dark, there is enough salt in the container.

When the color is light, open the container and add dishwasher salt.

1   On/Off button

2   Start/Pause/Cancel button

3   Display

4   Program Selection buton

5   Half Load/Combi Tablet button

6   Time Delay buton

7   Door Handle

8   Program Indicator

9   Salt level indicator led *

10 Rinse aid level indicator led

11 Remaining Time Indicator/Delay 

Time Indicator

12 Start/Pause/Cancel indicator led

13 Time Delay indicator led

14 Half Load/Combi Tablet indicator led

15 Program Steps Follow-up Indicator

     

a Washing Step Indicator “ ”

     

b Drying Step Indicator “ ”

     

c End of Program Indicator “ ”