Monogram ZV36TSFSS Manual

Page of 12
8
Light bulbs
The bulbs are located on the underside of 
the hood.
To change the light bulbs:
1.
Remove the trim ring by turning it
counterclockwise.
2.
Grasp the bulb on the edges and remove 
by turning it counterclockwise.
3.
Replace with the same type and size bulb.
These 120 volt, 50 watt, par 16 halogen flood 
bulbs, with standard base, are available at
specialty lighting stores. 
These bulbs can also be ordered from your 
GE supplier.
Order bulb no. WB08X10028.
Care and Cleaning
Professional Range Hood
Warming
lamps
The warming lamps are located on the
underside of the hood.
These 120 volt, 175 watt, par 38 infrared  heat
lamp bulbs, with standard base, are available 
at some specialty lighting stores.
These infrared bulbs can also be ordered 
from your GE supplier.
Order bulb no. WB08X10029.
NOTE:
If warming lamps are not desired,
additional cooktop lighting can be obtained 
by replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialty lighting stores.
Do not use a steel wool pad; it will scratch 
the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain.
Follow the cleaner instructions for cleaning 
the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center
1.800.626.2002
ge.com
Stainless
steel surfaces
(on some
models)