Viking RVER33015BBK Installation Instruction

17

2

1

1

3

2

1

2

Remove access door.

Remove supply cord strain relief 

bracket and three supply cord mounting screws 

on the terminal block.

Electrical Connection (4-wire)

WARNING

To avoid risk or electrical
shock, personal injury or death;

grounding product to the frame of the unit
may or may not be permitted through
your local codes. If ground to the frame is
not permitted then a 4-conductor power
cord must be used.

WARNING

To avoid risk of electrical shock,
personal injury or death; verify

your appliance has been properly
grounded in accordance with local codes
or in absence of codes, with the National
Electrical Code (NEC). ANSI/NFPA-70 –
latest edition.

2

1

3

Remove grounding screw. Cut-off 

and discard ground strap.

See Electrical Requirements information.

Where local codes do not permit grounding
through neutral, use a 4-wire power supply
cord. The cord or conduit must be secured
to the range with the strain relief bracket.

The electrical connection is made at the
terminal block, which is located behind the
access door on the back of the range.