Electrolux EW36GC55GB Manual

Burner Cap

Burner
Head

The 30” cooktop is equipped with different sized burners.

The surface burners are located on the cooktop as follows (See Figure):

- a 5 000 BTU (natural gas) burner located at the right rear position;

- a 18 000 BTU (natural gas) burner located at the left rear position;

- a 9 500 BTU (natural gas) burner located at the left front position;

- and a 14 000 BTU (natural gas) burner located at the right front position.

30” cooktop

The 36” cooktop is equipped with different sized burners.

The surface burners are located on the cooktop as follows (See
Figure):

- a 5 000 BTU (natural gas) burner located at the right rear position;

- two 9 500 BTU (natural gas) burners located at the left front and left

rear positions;

- a 18 000 BTU (natural gas) burner located at the center position;

- and a 14 000 BTU (natural gas) burner located at the right front

position.

36” cooktop

For the 18 000 BTU burner :
Place the burner head over the gas orifice (Figure 1). Be careful not to damage the
electrode while placing the burner head over the orifice. Make sure electrode fits
correctly into slot in burner head.

Figure 1

Burner
Head

Gas Opening

For all burners :
Place a burner cap on each burner
head (see Figure 2), matching the cap
size to the head size. The cap for each
burner has an inner locating ring which
centers the cap correctly on the burner
head. Be sure that all the burner caps
and burner heads are correctly placed
BEFORE using your appliance.

Make sure each burner cap is properly
aligned and level.

Turn the burner on to determine if it will
light. If the burner does not light,
contact a Service Center. Do not
service the sealed burner yourself.

Figure 2

Gas
Opening