OceanAire 2OACH3634 Manual
17
O
A
CEAN IRE
OCEANAIRE DELUXE ELECTRONIC CONTROLLER
When power is connected, the controller will display “888” momentarily, and will
then go blank. Press the POWER button, then press the TEMP SELECT button until
the SET POINT is displayed. Adjust the SET POINT to the desired temperature,
and the unit will heat/cool as required.
then go blank. Press the POWER button, then press the TEMP SELECT button until
the SET POINT is displayed. Adjust the SET POINT to the desired temperature,
and the unit will heat/cool as required.
The systems controls temperature within +/- 2°
POWER
—Turns the unit on/off when power is supplied
MODE
- Selects the mode of operation from AUTO to Cool, to Heat, or to Moisture
Control.
AUTO
- The controller will heat or cool as required. HEAT or COOL will display
accordingly. A 4° differential is needed to change between cooling and heating
modes.
modes.
COOL
- The system will operate in cooling mode, only.
HEAT
- The system will operate in heating mode, only.
MOISTURE CONTROL
- The system operates in the cooling mode to reduce humid-
ity within the conditioned space.
Every 4 hours, the fan is started, circulating the air, and the air temperature is re-
corded by the controller. The cooling cycle is started for one hour, or until the room
temperature drops 2°, which ever comes first. This cycle repeats every four hours.
corded by the controller. The cooling cycle is started for one hour, or until the room
temperature drops 2°, which ever comes first. This cycle repeats every four hours.
Deluxe Electronic Controller
The CONVERTIBLEAIRE controller is equipped with many features
for a more precise level of cooling and operation. Additionally, the
controller can be removed from the unit and installed for remote op-
eration, if desired—accessory parts may be required.
for a more precise level of cooling and operation. Additionally, the
controller can be removed from the unit and installed for remote op-
eration, if desired—accessory parts may be required.