Whirlpool WDF760SADM Owner's Manual

Page of 52
11
EZ-2-Lift™ Top Rack Adjuster (on some models)
You can raise or lower the top rack to fit 
tall items in either the top or bottom 
rack. Adjusters are located on each 
side of the top rack. 
To raise or lower the rack with adjuster 
1, hold the top rack with one hand near 
the adjuster and use the other hand to 
pull out the top of the adjuster. Raise or 
lower the rack to one of the preset 
positions.
To raise the rack with 
adjuster 2, lift and pull up.
To lower the rack, lift up 
and let down.
NOTE: The top rack must 
be level.
Removable Top Rack
The removable top rack allows you to wash larger items such as 
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from 
dishwasher.
To remove the rack
1. To gain access to the 
track stops, pull the 
upper rack forward 
about halfway out of the 
tub.
2. To open, flip the track 
stop toward the outside 
of the tub.
3. After opening both track 
stops, pull top rack out 
of the rails.
4. Close track stops and 
slide the tracks back into 
the dishwasher.
To replace the rack
1. Gently pull tracks forward in dishwasher until they stop. Open 
track stops.
2. Place the back wheels on each side of the rack into the track 
slot and roll them back into the tracks, but do not push the 
rack all the way into the tub.
3. Insert front rack wheels on each side of the rack into the track 
slots.
4. Slide rack into the dishwasher. The stops will automatically 
close when rack enters dishwasher.