Yamaha YSP-2500 Owner's Manual

SETTINGS

➤ Settings each input source (Option menu)

En

Adjust the output level of high (treble) and low (bass) tones.

-12 to +12 (default: 0)

Adjust the input level for each jack to compensate for variations in volume.

-12 to +12 (default: 0)

TV images sometimes lag behind the sound. You can use this function to delay the 
sound output to synchronize it with the video image.

HDMI1– 3: AUTO (default), 0 ms to 500 ms, 5 ms increments

TV, OPTICAL, AUX1– 2: 0 ms (default) to 500 ms, 5 ms increments

When “AUTO” is selected, output timing is automatically adjusted. This setting is only 
available when the TV connected via HDMI cable supports the audio delay automatic 
adjustment feature.

When HDMI1– 3 is the selected input source, sound can be input from the OPTICAL 
jack or AUX2 (coaxial) jack rather than the HDMI IN jack.

Use this function to listen to sound from a different playback device while watching 
video of the BD/DVD player.

HDMI (default), OPTICAL, AUX2

• While the AUX2 (coaxial) jack is the default AUX2 setting, sound is input as follows depending upon the 

setting specified for “TV INPUT” (p. 60) in the setup menu.

– “TV INPUT” set to “OPTICAL [TV]” (default)

When “AUX2” is selected, sound is input from the AUX2 (coaxial) jack.

– “TV INPUT” set to “COAXIAL [AUX2]”

When “AUX2” is selected, sound is input from the TV (optical) jack.

Adjust the output level of high (treble) 
tones.

HDMI1– 3, TV, OPTICAL, AUX1– 2, 
Bluetooth

Adjust the output level of low (bass) 
tones.

HDMI1– 3, TV, OPTICAL, AUX1– 2, 
Bluetooth

Adjust the input level for each jack to 
compensate for variations in volume.

HDMI1– 3, TV, OPTICAL, AUX1– 2, 
Bluetooth

Adjust deviations in timing between 
audio and video playback.

HDMI1– 3, TV, OPTICAL, AUX1– 2

When an HDMI device is selected as 
the input source, audio from a different 
input source is assigned to HDMI 
audio.

HDMI1– 3