Yamaha RX-A2040 Owner's Manual

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Configures the audio output settings.

■

Adjusts the delay between video and audio by holding up the audio output.

Enables/disables the Lipsync adjustment for each input source.

AV 1–7, V-AUX, AUDIO 1–4

Selects the method to adjust the delay between video and audio output.

• Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on 

the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.

Adjusts the delay between video and audio output manually when “Auto/Manual 
Select” is set to “Manual”. You can fine-adjust the audio output timing when 
“Auto/Manual Select” is set to “Auto”.

0 ms to 500 ms (1 ms increments)

• When “Auto/Manual Select” is set to “Auto”, “Offset” shows the difference between automatic 

adjustment and fine adjustment.

■

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and 
DTS signals) playback.

■

Sets the maximum volume to prevent excessive loudness.

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

Disable

Disable the Lipsync adjustment for the selected input source.

Enable

Enables the Lipsync adjustment for the selected input source.

Auto

Adjusts the delay between video and audio output automatically when 
a TV that supports an automatic lipsync function is connected to the 
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in 
“Adjustment”.

Manual

Select this option when you want to adjust the delay between video 
and audio output manually.
Adjust the audio output timing in “Adjustment”.

Maximum

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

Minimum/Auto

Sets the dynamic range for clear sound even at night or at low 
volumes.
When playing back Dolby TrueHD signals, the dynamic range is 
automatically adjusted based on the input signal information.