Yamaha RX-A2040 Owner's Manual

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Configures the video output settings.

■

Enables/disables the video signal processing (resolution, aspect ratio and video 
adjustments).

• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to 

reduce video output delay.

Selects a resolution to output HDMI video signals when “Video Mode” is set to 
“Processing”.

• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.146) in 

the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be 
displayed on your TV normally.)

Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to 
“Processing”.

• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 

1080p, or 2160p (4K) signals.

Configures the video adjustments when “Video Mode” is set to “Processing”. You 
can register the video adjustments as presets (up to 6).

■

Use the cursor keys (q/w) to select a preset number and press ENTER.

Use the cursor keys (q/w) to select an item.

Use the cursor keys (e/r) to select a setting and press ENTER.

Adjusts the enhancement effect of video details.

0 to 50

Direct

Disables the video signal processing.

Processing

Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.

Through

Does not convert the resolution.

Auto

Selects a resolution automatically in accordance with TV resolution.

480p/576p, 720p, 
1080i, 1080p, 4K

Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)

Through

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either side 
of the screen.