Wine Guardian Through-the-Wall 2200 BTUH Air-cooled Wine Cooling Unit Installation Instruction
34
Humidity Too Low or Supply Air is Too Cold, Without Optional
Standalone Humidifier
Standalone Humidifier
Possible Cause
Solution
Not enough evaporator airflow
Remove blockage in supply or return ductwork
Check and clean coil
Coil frozen – shut off system for two hours
Coil frozen – shut off system for two hours
Defective or incorrect expansion device or coils Factory call
for service
Humidity Too Low, Without Optional Humidifier
Possible Cause
Solution
No moisture being added to cellar
Add Wine Guardian humidifier or a room
humidifier
Humidity Too Low with Optional Humidifier- Read Humidifier
Troubleshooting
Troubleshooting
Possible Cause
Solution
Humidifier not operating
Check wiring for loose, broken or
frayed connections
Check humidistat set up
Check for water flow & solenoid valve operation
frayed connections
Check humidistat set up
Check for water flow & solenoid valve operation
Humidifier operating
Check for water being hot
Check drip pad – replace if scaled
No vapor barrier installed around cellar
Check drip pad – replace if scaled
No vapor barrier installed around cellar
Humidity Too High When Unit is Running But Not Cooling
Possible Cause
Solution
Compressor not operating
Check and reset high limit switch
Clear blockage of condenser airflow
Ambient temperature is too high
Reduce temperature or draw condenser air from
another space
another space
Problems Controlling Cellar Humidity