Summit Freestanding Dual Faucet Commercial Kegerator - Black Cabinet/Diamond Plate Door User Manual
6
Reversing the Door Swing
Figure 1 (Default position) Figure 2 (After door reversal)
1. Upper hinge cover
6. Screws
2. Screws
7. Hole cover
3. Upper hinge
8. Cabinet
4. Door
9. Pin cap
5. Lower door hinge
The beer dispenser can be opened from either the right side or the left. By default, the
door hinge is on the right side. If you prefer it on the left, please follow these instructions:
door hinge is on the right side. If you prefer it on the left, please follow these instructions:
Note: All of the parts that are removed must be kept for the reinstallation of the door.
1.
Remove the three screws (6) holding lower door hinge (5). Keep hinge for later use.
2.
Remove the door from the upper hinge (3), and keep the padded surface upward to
prevent scratching.
prevent scratching.
3.
Remove the upper hinge cover (1), remove the two screws (2), remove the upper
hinge (3) and keep it for later use.
hinge (3) and keep it for later use.
4.
Remove the hole cover (7) and transfer it to the same location on the opposite side.
5.
Insert the lower door hinge (5) into the left side, fixing the hinge into place by
tightening all the screws (6).
tightening all the screws (6).
6.
Remove the pin cap (9) from the left side of the upper door frame and then transfer it
to the same location on the opposite side.
to the same location on the opposite side.
7.
Set the door on the lower door hinge (5), keep the door level, then fix the upper hinge
(3) to the body (8) by the screws (2).
(3) to the body (8) by the screws (2).
8.
Put on the upper hinge cover (1).