Electrolux EI23BC35KS Owner's Manual

Once both doors are in place, ensure they are 

aligned with each other and level (Please see 

the “Installation” section for more details), and 

replace the top hinge cover.

Be sure doors are set aside in a secure 

position where they cannot fall and 

cause personal injury, or damage to the 

doors or handles.

You will be pulling approximately five feet of 

water tube from the back of the refrigerator.

Press

Press

Approximately

5 feet

Water

Line

To reinstall the right door, reverse the above 

steps.

Removing Freezer Drawer
  1  Open freezer drawer.
  2  Remove drawer screws on right and left 

sides (two screws on each side).

  3  Lift drawer up and out to remove.

Installing Freezer Drawer
  1  With lower slides pulled out, hang 

drawer onto slide brackets ensuring pins 

on each side are fully inserted into slots 

on each side.

Drawer is heavy. Use caution when lifting.

Remove

Hex

Head Drawer

Screw

Remove hex 

head drawer 

screw

Remove

Hex

Head Drawer

Screw

Remove hex

head drawer

screw

Do Not Remove

Other Screws

When reinserting the water tube and 

replacing the top hinge cover, use care to 

be sure you do not kink the tube.

Assembly

Pin

Slot

Cabinet

Fully Extend

Drawer Slides