Electrolux EI23BC35KS Owner's Manual
12
3 Check gasket seal around top, bottom,
and sides of freezer drawer.
4 If gasket is not sealed, open drawer and
slightly loosen four drawer screws (two
on each side) to allow drawer to rotate.
5 Close drawer and recheck the seal
on the gasket (A). Open the drawer
grabbing by the sides in the center (B).
Be careful not to rotate the drawer.
A
B
Grab
Drawer
at Center
from Both
Sides
Then
Pull
Drawer
Out
Push
Against
Freezer
Drawer
6 Tighten four drawer screws.
7 Recheck gasket seal.
8 Install the toe grille by fitting into place.
7 Recheck gasket seal.
8 Install the toe grille by fitting into place.
Install Hex
Head Drawer
Screws
2 Reinstall four drawer screws (two per
side), tighten down, and close drawer (C).
Removing the Doors