Electrolux E30GC70FSS Owner's Manual
8
Surface Cooking
To prevent flare-ups and avoid creation of harmful
by-products,
do not use the cooktop without all
burner caps properly installed to insure proper
ignition and gas flame size.
It is very important to be sure that all surface
It is very important to be sure that all surface
burner caps and burner grates are properly
installed and in the correct locations
BEFORE
operating the cooktop burners.
Remember:
• Always keep surface burner caps in place
whenever using a surface burner.
• When placing the burner caps, be sure that all
burner caps are
seated firmly and rest level on
top of burner heads.
• For proper flow of gas and ignition of burners
DO NOT allow spills, food, cleaning agents or
any other material to enter the gas orifice port
opening.
Round Style Burners
The burner cap lip (See Fig. 1) should fit snug into
the center of burner head and rest level. Refer to
Figs. 2 & 3 for correct and incorrect burner cap
placement. Once in place, you may check the fit by
gently sliding the burner cap from side to side (Fig.
4) to be sure it is centered and firmly seated. When
the burner cap lip makes contact inside the center
of the burner head you will be able to feel it. Please
note that the burner cap should NOT move off the
center of the burner head when sliding from side to
side.
Placement of burner heads
and caps
Burner
Cap
Burner
Head
Fig. 1
Fig. 4
Correct Burner Cap
Placement
Fig. 2
Incorrect Burner Cap
Placement
Fig. 3
Burner
Cap Lip