Philips CCU7740N/00 User Manual
Frequently Asked Questions
13
8
Frequently asked questions
In this chapter you will find the most frequently asked questions and
answers about your Wireless USB Adapter. Check them and our web
site www.philips.com/welcome before contacting our technical support.
answers about your Wireless USB Adapter. Check them and our web
site www.philips.com/welcome before contacting our technical support.
Set-up
My PC cannot find the Wireless USB Adapter/The network
driver does not install correctly
• Check that your USB Adapter is properly connected
• If you use a USB cable, check that the USB cable is securely connected
driver does not install correctly
• Check that your USB Adapter is properly connected
• If you use a USB cable, check that the USB cable is securely connected
to the USB connectors of both the adapter and of your PC.
• Check that your USB Adapter is not damaged.
• Check for any hardware problems, such as physical damage to the
• Check for any hardware problems, such as physical damage to the
adapter’s connector.
• Check that the USB port you use is not defective. Try to connect the
adapter to another USB port. If this also fails, test your computer with
another USB device that is known to operate correctly.
another USB device that is known to operate correctly.
• If there are other network adapters in the computer, they may be
causing conflicts. Remove all other adapters from the computer and
test the wireless adapter separately.
test the wireless adapter separately.
If it still does not work, try re-installing the wireless USB adapter from
the original Installation CD. Restart your PC.
the original Installation CD. Restart your PC.
I cannot access any network resources from the computer
• Make sure the computer and other network devices are receiving
• Make sure the computer and other network devices are receiving
power.
I have no access to a Windows or NetWare service on the
network
• Check that you have enabled and configured the service correctly. If
network
• Check that you have enabled and configured the service correctly. If
you cannot connect to a particular server, be sure that you have
access rights and a valid ID and password. If you cannot access the
Internet, be sure you have configured your system for TCP/IP
access rights and a valid ID and password. If you cannot access the
Internet, be sure you have configured your system for TCP/IP
My Wireless USB Adapter cannot communicate with a
computer in the network when configured for Infrastructure
mode
• Make sure the access point that the router is associated with is
computer in the network when configured for Infrastructure
mode
• Make sure the access point that the router is associated with is
powered on.
• Reposition your Wireless USB Adapter
• Make sure the SSID and the network encryption key are the same as
• Make sure the SSID and the network encryption key are the same as
those used by the wireless access point.
My network speed does not exceed 11 Mbps
• Connect the Wireless USB Adapter to a hi-speed USB 2.0 port for
• Connect the Wireless USB Adapter to a hi-speed USB 2.0 port for
maximum speed.
• Make sure all network components are suitable for high network
speeds.
Product behaviour
The link blue LED on the Wireless USB Adapter does not light
• Make sure that the computer and other network devices are
• Make sure that the computer and other network devices are
receiving power.