Allied Telesis AT-8700XL User Manual
136
QoS Enhancements
Release Note
Software Version 2.8.1
C613-10477-00 REV B
C613-10477-00 REV B
show qos policy
Syntax
SHow QOS POLIcy[={id|ALL}]
This command displays information about QoS policies and now includes
information about port groups assigned to them.
information about port groups assigned to them.
STORMAction
Action QoS takes when a storm is detected on a port.
Default: portdisable
LINKDown
Operationally disables ports to which the traffic class
is attached.
POrtdisable
Administratively disables ports to which the traffic
class is attached.
class is attached.
VLANdisable
Administratively disables ports to which the traffic
class is attached for the VLAN on which the classifier
is matching.
class is attached for the VLAN on which the classifier
is matching.
STORMTimeout
Length of time the port remains disabled after a storm is detected.
Default: none
timeoutlength Duration in seconds from 1 to 86400.
NONE
The port remains disabled until you enable it again
with the enable switch port or enable switch
port vlan command in the Switching chapter.
with the enable switch port or enable switch
port vlan command in the Switching chapter.
Table 31: Parameters in output of the show qos trafficclass=18 command
Parameter
Meaning
Status
Whether storm protection is enabled for the default traffic class.
Action
Whether the port is administratively or operationally disabled
when the volume of traffic exceeds the rate.
when the volume of traffic exceeds the rate.
Rate
Allowable traffic volume before action is executed.
Window
Interval in milliseconds between checking the traffic class for
storms.
storms.
Timeout
Length of time in seconds that the port remains disabled when it
is disabled by storm protection.
is disabled by storm protection.
Parameter (cont.)
Description (cont.)