Allied Telesis AT-8700XL User Manual

Page of 232
Software Version 2.8.1
137
Software Version 2.8.1
C613-10477-00 REV B
Figure 39: Example output of the modified show qos policy command
show qos port
Syntax
SHow QOS POrt[={port-list|ALL}] [EGRessqueue=queue-list]
Description
This command displays QoS information about ports and now includes 
information about port groups (bold in example below).
Identifier .................. 1
Description ................. all ports
TCs Assigned ................ 5,7,22,31-33
Port(s) Assigned to ......... 1-24
Port Group(s) Assigned to ... 1(1-12) 
                              2(13-24)
Trunk(s) Assigned to ........ None
Default Traffic Class:
  Minimum Bandwidth ......... None
  Minimum Burst Size ........ 0 B
  Maximum Bandwidth ......... 10 Mbps
  Maximum Burst Size ........ 64 kbyte
  Drop BandwidthClass3 ...... YES
  Ignore BandwidthClass ..... YES
  Premarking ................ USEMARKVALUE
  Remarking ................. UESDSCPMAP
  Mark value ................ 0
  Action .................... SENDVLANPORT
    VLAN .................... 2
    PORT .................... 4
  Storm Protection:
    Status .................. ENABLED
    Action .................. PORTDISABLE
    Rate .................... 1kbps
    Window .................. 100ms
    Timeout ................. None
Table 32: New parameters in output of the show qos policy command
Parameter
Meaning
Port Group(s) Assigned to
ID of the port group that is assigned to the policy.
Trunk(s) Assigned to
Trunks to which the policy has been assigned.
Status
Whether storm protection is enabled for the default traffic 
class.
Action
Whether the port is administratively or operationally 
disabled when the volume of traffic exceeds the rate.
Rate
Allowable traffic volume before action is executed.
Window
Interval in milliseconds between checking the traffic class 
for storms.
Timeout
Length of time in seconds that the port remains disabled 
after having been disabled by storm protection.