Sony PCWA-A100 User Manual
2
Owner’s Record
The model and serial numbers are located on
the bottom of the product. Record the serial
number in the space provided below. Refer to
them whenever you call upon your Sony
dealer regarding this product.
The model and serial numbers are located on
the bottom of the product. Record the serial
number in the space provided below. Refer to
them whenever you call upon your Sony
dealer regarding this product.
Model No. PCWA-A100, PCWA-A200
Serial No.______________
Serial No.______________
NOTE
FCC Part 68 and INDUSTRY CANADA
NOTICE are for PCWA-A100 only.
FCC Part 68 and INDUSTRY CANADA
NOTICE are for PCWA-A100 only.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your warranty.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your warranty.
FCC ID: IMRWLPCE24H
Exposure to Radio Frequency Radiation.
The radiated output power of the Wireless
LAN PC Card* is far below the FCC radio
frequency exposure limits.
Nevertheless, the Wireless LAN PC Card*
shall be used in such a manner that the
potential for human contact during normal
operation is minimized.
Exposure to Radio Frequency Radiation.
The radiated output power of the Wireless
LAN PC Card* is far below the FCC radio
frequency exposure limits.
Nevertheless, the Wireless LAN PC Card*
shall be used in such a manner that the
potential for human contact during normal
operation is minimized.
* The Wireless LAN Access Point PCWA-A100/
A200 contains a Wireless LAN Card.
(FCC ID of the Wireless LAN PC card is
IMRWLPCE24H.)
(FCC ID of the Wireless LAN PC card is
IMRWLPCE24H.)
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio or
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to television
reception, which can be determined by
turning the equipment off and on, you are
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio or
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to television
reception, which can be determined by
turning the equipment off and on, you are
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Declaration of Conformity
Trade Name: Sony
Model No: PCWA-A100/A200
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road,
Trade Name: Sony
Model No: PCWA-A100/A200
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road,
Oradell, NJ 07649 USA
Telephone: 201-930-6972
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Notes
• The power outlet should be near the
• The power outlet should be near the
equipment and easily accessible.
• This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numerique de la classe B est
conforme a la norme NMB-003 du Canada.
Cet appareil numerique de la classe B est
conforme a la norme NMB-003 du Canada.
Safety Information
WARNING
• Opening the unit, for whatever reason,
WARNING
• Opening the unit, for whatever reason,
could lead to damages that are not covered
by the guarantee.
by the guarantee.
• To prevent fire or shock hazard, do not
expose your Sony Wireless LAN Access
Point to rain or moisture.
Point to rain or moisture.
• Never install modem or telephone wiring
during a lightning storm.
• Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
designed for wet locations.
• Never touch uninsulated telephone wire or
terminals unless the telephone line has
been disconnected at the network interface.
been disconnected at the network interface.
• Use caution when installing or modifying
telephone lines.
• Avoid using the modem during an
electrical storm.
• Do not use the modem or a telephone to
report a gas leak while in the vicinity of the
leak.
leak.