Sony PCWA-A100 User Manual
3
• Use only the supplied AC adapter with
your Sony Wireless LAN Access Point. To
disconnect your Wireless LAN Access
Point from the power supply, unplug the
AC adapter.
disconnect your Wireless LAN Access
Point from the power supply, unplug the
AC adapter.
• Make sure the power outlet is easily
accessible.
FCC Part 68 (PCWA-A100 only)
This equipment complies with Part 68 of the
FCC rules. The Ringer Equivalence Number
(REN) and the FCC registration number are
printed on the modem board. If requested,
this information must be supplied to the
telephone company.
The REN is used to determine the quantity of
devices which may be connected to the phone
line. Excessive REN on the telephone line
may prevent incoming calls from ringing. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of
the number of devices you can connect to the
line, contact the telephone company to
determine the maximum REN for the calling
area.
If this equipment causes harm to the
telephone network, your local telephone
company will, when practical, notify you in
advance that a temporary discontinuance of
service may be required. If advance notice is
not practical, the telephone company will
notify you as soon as possible. You will be
advised of your right to file a complaint with
the FCC.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
this equipment. If this happens, the telephone
company will notify you in advance to make
the necessary modifications to maintain
uninterrupted service. For repair or warranty
information, please contact 1-877-760-7669, or
write to the Sony Customer Information
Center, 12451 Gateway Boulevard., Fort
Myers, FL 33913. This equipment cannot be
used on telephone-company-provided coin
service. Connection to party line service is
subject to state tariffs.
Repair of the equipment should be made only
by a Sony Service Center or Sony authorized
agent. For the Sony Service Center nearest
you, call 1-877-760-7669.
This equipment complies with Part 68 of the
FCC rules. The Ringer Equivalence Number
(REN) and the FCC registration number are
printed on the modem board. If requested,
this information must be supplied to the
telephone company.
The REN is used to determine the quantity of
devices which may be connected to the phone
line. Excessive REN on the telephone line
may prevent incoming calls from ringing. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of
the number of devices you can connect to the
line, contact the telephone company to
determine the maximum REN for the calling
area.
If this equipment causes harm to the
telephone network, your local telephone
company will, when practical, notify you in
advance that a temporary discontinuance of
service may be required. If advance notice is
not practical, the telephone company will
notify you as soon as possible. You will be
advised of your right to file a complaint with
the FCC.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
this equipment. If this happens, the telephone
company will notify you in advance to make
the necessary modifications to maintain
uninterrupted service. For repair or warranty
information, please contact 1-877-760-7669, or
write to the Sony Customer Information
Center, 12451 Gateway Boulevard., Fort
Myers, FL 33913. This equipment cannot be
used on telephone-company-provided coin
service. Connection to party line service is
subject to state tariffs.
Repair of the equipment should be made only
by a Sony Service Center or Sony authorized
agent. For the Sony Service Center nearest
you, call 1-877-760-7669.
Telephone Consumer Protection Act of 1991
The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to use
a computer or other electronic device to send
any message via telephone facsimile machine
unless such message clearly contains (in a
margin at the top or bottom of each
transmitted page or on the first page of the
transmission), the date and time it is sent and
an identification of the business, other entity,
or individual sending the message, and the
telephone number of the sending machine or
such business, other entity, or individual.
In order to program this information into
your facsimile machine, see your fax software
documentation.
The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to use
a computer or other electronic device to send
any message via telephone facsimile machine
unless such message clearly contains (in a
margin at the top or bottom of each
transmitted page or on the first page of the
transmission), the date and time it is sent and
an identification of the business, other entity,
or individual sending the message, and the
telephone number of the sending machine or
such business, other entity, or individual.
In order to program this information into
your facsimile machine, see your fax software
documentation.
Notes (PCWA-A100 only)
• The modem uses an RJ-11 telephone jack.
• The Ringer Equivalence Numbers for this
• The modem uses an RJ-11 telephone jack.
• The Ringer Equivalence Numbers for this
equipment is 0.5B.
INDUSTRY CANADA NOTICE (PCWA-A100
only)
The industry Canada label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective, operational and safety
requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements
document(s). The department does not
guarantee the equipment will operate to your
satisfaction.
only)
The industry Canada label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective, operational and safety
requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements
document(s). The department does not
guarantee the equipment will operate to your
satisfaction.
Check with your local telephone company
before installing this equipment. They can
advise you of the acceptable connection
method.
before installing this equipment. They can
advise you of the acceptable connection
method.
Be aware that compliance with the above
conditions may not prevent degradation of
service in some situations.
conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be
coordinated by a representative designated
by the supplier. Equipment malfunctions or
any repairs or alterations made by you to this
equipment may give the telecommunications
company cause to request that the user
disconnect the equipment.
coordinated by a representative designated
by the supplier. Equipment malfunctions or
any repairs or alterations made by you to this
equipment may give the telecommunications
company cause to request that the user
disconnect the equipment.
For your own protection, ensure that the
power utility, telephone lines and internal
metallic water pipe systems are grounded.
This may be particularly important in rural
areas.
power utility, telephone lines and internal
metallic water pipe systems are grounded.
This may be particularly important in rural
areas.
CAUTION: Contact the appropriate electrical
inspection authority or electrician, as
appropriate. Do not attempt this yourself.
inspection authority or electrician, as
appropriate. Do not attempt this yourself.