Ricoh 170 / 180 User Manual
Installation Procedure
1 Attach the accessories to the main machine.
1-1) Copy Tray [A]
1-2) Document Table [B]
1-3) Quick Dial Sheet [C]
1-4) Telephone Cord [D]
NOTE: Make sure the transparent
strip that prevents paper curling is
above the copy tray.
strip that prevents paper curling is
above the copy tray.
2. Install a thermal paper roll.
2-1) Lift the catch to unlock the
printer cover. Then, hold the
paper guides and open the
cover.
printer cover. Then, hold the
paper guides and open the
cover.
2-2) Unpack the thermal paper.
2-3) Set the paper guides [E] at each
end to match the paper size.
The paper roll must be set in
the center.
end to match the paper size.
The paper roll must be set in
the center.
2-4) Install the rod into the paper roll
as shown, then set the roll into
the machine (hold the roll in a
direction so that it rolls away
from you when pulled upwards.)
as shown, then set the roll into
the machine (hold the roll in a
direction so that it rolls away
from you when pulled upwards.)
NOTE: Make sure the ends of rod fit
into the paper guides there is no
slack paper inside the machine.
into the paper guides there is no
slack paper inside the machine.
2-5) Pull out the leading edge and
insert it between the roller and
the cover until you can see the
leading edge of the paper.
insert it between the roller and
the cover until you can see the
leading edge of the paper.
NOTE:
❐
Make sure the transparent strip that
prevents paper curling is above the copy tray.
prevents paper curling is above the copy tray.
❐
Make sure the paper edges are aligned
with the marks printed by the roller.
with the marks printed by the roller.
[C]
[B]
[A]
[D]
[E]
8
1
/
A4
INSTALLING THE MACHINE
14