Ricoh 170 / 180 User Manual
3. Change the setting of digit 3. Press 3 us-
ing the ten keypad .
KPAD/Y/j k
SWITCH 08:0000 1100
4. Finish: Press the Yes key, then press
the Function key.
Programming the Authorized Senders
1. Press the Function key and
6,2,2,2,2,7,1 using the ten keypad then
press the Yes key.
press the Yes key.
SETTING? Y/j k
PRINT LISTj/SEARCHk
❐
At this time, you can print an Authorized Reception
List by pressing the
List by pressing the
j
key, then press the Start key.
2. Press the Yes key.
RTI/CSI ABC j k
llllllllllllllllll
3. Type in an RTI or CSI.
Example: XYZ.CO.
RTI/CSI ABC j k
XYZ.CO.llllllllllll
4. Press the Yes key. If the display is not
as opposite, press the Yes key again.
RTI/CSI Y/N
STORE AS WILD CARD?
5. Either:
RTI/CSI ABC j k
llllllllllllllllll
❐
Store this RTI as a Wild card:
Press the Yes key.
Press the Yes key.
❐
Otherwise: Press the No key.
6. Either:
❐
Store another RTI/CSI: Go to step 2.
❐
Finish: Press the Function key.
Editing the Authorized Senders
1. Press the Function key and
6,2,2,2,2,7,1 using the ten keypad then
press the Yes key.
press the Yes key.
SETTING? Y/j k
PRINT LISTj/SEARCHk
❐
At this time, you can print an Authorized Reception
List by pressing the
List by pressing the
j
key, then press the Start key.
2. Press the Yes key.
RTI/CSI ABC
llllllllllllllllll
Digit 3
0: Accept incoming messages only from
specified senders.
1: Accept all incoming messages except those
from specified senders.
0: Accept incoming messages only from
specified senders.
1: Accept all incoming messages except those
from specified senders.
Label input and editing: see page 100.
RECEPTION
68