Ricoh 170 / 180 User Manual

When you switch Forwarding on, messages  your machine forwards are not
printed. If you wish, you can also print them from your machine.

1. Press the Function key and

6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.

SETTING?             Y/j  k

PRINT LIST j

2. Press the Yes key, then press the 

k

 key

until the settings for Switch 11 are dis-
played. Change the setting of digit 6.

                     KPAD/j k

SWITCH 11: 0000 0000

3. If you wish to change the setting, press

6 using the ten keypad. 

                     KPAD/j k

SWITCH 11: 0100 0000

4. Finish:  Press the Yes key, then press

the Function key.

NOTE: When turned on and your machine fails to forward a message (for exam-

ple if the line is busy), you will still have printed copy.

The forwarding mark is printed at the receiving end on the top of each page of the
fax messages that are forwarded from your machine. This mark will help the
operator at the other end to recognize messages that have been forwarded. If you
wish, you can switch this mark off.
To switch the Forwarding Mark on or off, do the following procedure (See page
100 if you need more information about the User Parameter settings adjustment
procedure).

1. Press the Function key and

6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.

SETTING?             Y/j  k

PRINT LIST j

2. Press the Yes key, then press the 

j

 and

the 

k

 keys until the settings for Switch

02 are displayed. Change the setting of
digit 0.

                    KPAD/j k

SWITCH 02: 0000 0000

3. If you wish to change the setting, press

0 using the ten keypad. 

                    KPAD/j k

SWITCH 02: 0000 0001

4. Finish: Press the Yes key, then press

the Function key.

Digit 6
0: Local Printing Off
1: Local Printing On

Digit 0
0 Fowarding Mark Off
1 Fowarding Mark On

RECEPTION