Pelco C1977M-D User Manual
[ 8 ]
Pelco Manual C1977M-D (6/02)
WHAT IS THE PELCONET TRANSMISSION SYSTEM?
The PelcoNet Transmission System is a new technology that lets you view video in real time across a Local
Area Network (LAN) and even Wide Area Networks (WAN). This technology is based on the TCP/IP protocol
suite and Ethernet technology, providing compatibility with today’s networking standards.
Area Network (LAN) and even Wide Area Networks (WAN). This technology is based on the TCP/IP protocol
suite and Ethernet technology, providing compatibility with today’s networking standards.
(See the
Glossary
section for definitions of terms used in this manual.)
How Do LANs and WANs Work?
•
A LAN consists of multiple computers connected together, sharing information. This information could
be files, e-mail, printers, or—with the PelcoNet Transmission System—even live video and audio.
be files, e-mail, printers, or—with the PelcoNet Transmission System—even live video and audio.
•
A WAN consists of multiple LANs connected over a great distance (for example, the Internet).
•
In any network environment, each computer needs an address so other computers on the network
know how to reach it.
know how to reach it.
It is similar to a city with street addresses. For the post office to deliver mail to your house, you need
a unique street address for the mail carrier to find you. A network is like the city. Like a street address,
the IP address on your computer is your address on the network. The IP address is how other com-
puters can find you on the network.
a unique street address for the mail carrier to find you. A network is like the city. Like a street address,
the IP address on your computer is your address on the network. The IP address is how other com-
puters can find you on the network.
Remember that the IP address must be unique on the network.
•
When there are multiple networks and you are using the TCP/IP protocol, there must be a way to
communicate between the two networks. A physical device called a router is required. The router’s IP
address is referred to as the default gateway IP address.
communicate between the two networks. A physical device called a router is required. The router’s IP
address is referred to as the default gateway IP address.
•
A cable that connects one computer to another is like a city street you can use to get from one house
to another. The cable lets you communicate with each other on the network. This cable is Category 5
cable with RJ-45 connectors at each end. (It looks like a phone cord, only slightly larger.)
to another. The cable lets you communicate with each other on the network. This cable is Category 5
cable with RJ-45 connectors at each end. (It looks like a phone cord, only slightly larger.)
Who Should Install The PelcoNet Transmission System?
NOTE:
Consult your network administrator if you need help.
Installation is a matter of configuring an IP address using a standard terminal program or any Internet
browser and connecting the PelcoNet Transmission System to the Ethernet network. You should have the
following background and experience to configure and install these units:
browser and connecting the PelcoNet Transmission System to the Ethernet network. You should have the
following background and experience to configure and install these units:
•
Working knowledge of basic network management concepts and terminology
•
Working knowledge of tools and procedures for installing and operating sensitive electronic equipment