Panasonic KX-TG5230 User Manual
Special Features
56
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [*] (TONE) before entering access numbers which require tone
dialing.
dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the dialing
mode will return to pulse.
mode will return to pulse.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the mute (p. 54) or the Temporary Tone
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the mute (p. 54) or the Temporary Tone
Dialing mode (see above).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key (
).
4
Scroll to “Set flash time” by pressing [d]
or [B], then press the soft key (
).
5
Select the flash time by pressing [d] or [B].
6
Press the soft key (
), then press [OFF].
Handset Base Unit
Handset Base Unit
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set flash time
Set flash time
:700ms
SAVE
TG5230.fm Page 56 Wednesday, February 4, 2004 9:51 AM