ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual
Chapter 9 Routing
VMG5313-B10A/-B30A Series User’s Guide
157
9.3 The DNS Route Screen
Use this screen to view and configure DNS routes on the VMG. Click Network Setting > Routing
> DNS Route to open the following screen.
> DNS Route to open the following screen.
Figure 61
Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
IP Subnet Mask If you are using IPv4 and need to specify a route to a single host, use a subnet mask of
255.255.255.255 in the subnet mask field to force the network number to be identical to
the host ID. Enter the IP subnet mask here.
the host ID. Enter the IP subnet mask here.
Use Gateway IP
Address
Address
The gateway is a router or switch on the same network segment as the device's LAN or WAN
port. The gateway helps forward packets to their destinations.
port. The gateway helps forward packets to their destinations.
If you want to use the gateway IP address, select Enable.
Gateway IP
Address
Address
Enter the IP address of the gateway.
Use Interface
Select the WAN interface you want to use for this static route.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.
Table 39
Routing: Add/Edit (Sheet 2 of 2)
LABEL
DESCRIPTION
Table 40
Network Setting > Routing > DNS Route
LABEL
DESCRIPTION
Add new DNS
Route
Route
Click this to add a new DNS route.
#
This is the index number of a DNS route.
Domain Name
This is the host name or domain name of the DNS route entry.
Interface
This is the WAN connection through which the VMG forwards DNS requests for this domain
name.
name.
Subnet Mask
This is the subnet mask of the DNS route entry.
Modify
Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.