ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual

Chapter 9 Routing

VMG5313-B10A/-B30A Series User’s Guide

The following table describes the labels in this screen. 

Use this screen to add or edit a static route. Click Add new static route in the Routing screen or 
the Edit icon next to the static route you want to edit. The screen shown next appears.

Routing: Add/Edit

The following table describes the labels in this screen. 

Network Setting > Routing > Static Route

Add new static 
route

Click this to configure a new static route.

#

This is the index number of the entry.

Status

This field displays whether the static route is active or not. A yellow bulb signifies that this 
route is active. A gray bulb signifies that this route is not active.

Name

This is the name that describes or identifies this route. 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is always 
based on network number. 

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward packets to 
their destinations.

Interface

This is the WAN interface used for this static route.

Modify

Click the Edit icon to edit the static route on the VMG.

Click the Delete icon to remove a static route from the VMG. A window displays asking you 
to confirm that you want to delete the route. 

Routing: Add/Edit (Sheet 1 of 2)

Active

This field allows you to activate/deactivate this static route.

Select this to enable the static route. Clear this to disable this static route without having to 
delete the entry.

Route Name

Enter a descriptive name for the static route.

IP Type

Select whether your IP type is IPv4 or IPv6. 

Destination IP 
Address

Enter the IPv4 or IPv6 network address of the final destination.