ZyXEL Communications VMG5313-B10A/ VMG5313-B30A User Manual

Chapter 9 Routing

VMG5313-B10A/-B30A Series User’s Guide

Click Add new Policy Forward Rule in the Policy Forwarding screen or click the Edit icon next 
to a policy. Use this screen to configure the required information for a policy route.

Policy Forwarding: Add/Edit 

The following table describes the labels in this screen. 

Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing 
information with other routers.

Policy Forwarding: Add/Edit

Policy Name

Enter a descriptive name of up to 8 printable English keyboard characters, not including 
spaces.

Source IP 

Enter the source IP address.

Source Subnet 
Mask

Enter the source subnet mask address. 

Protocol

Select the transport layer protocol (TCP or UDP). 

Source Port 

Enter the source port number. 

Source MAC 

Enter the source MAC address. 

WAN

Select a WAN interface through which the traffic is sent. You must have the WAN 
interface(s) already configured in the Broadband screens. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.