ZyXEL Communications VMG5313-B10A/ VMG5313-B30A Manual Do Utilizador
Chapter 9 Routing
VMG5313-B10A/-B30A Series User’s Guide
160
9.4.1 Add/Edit Policy Forwarding
Click Add new Policy Forward Rule in the Policy Forwarding screen or click the Edit icon next
to a policy. Use this screen to configure the required information for a policy route.
to a policy. Use this screen to configure the required information for a policy route.
Figure 64
Policy Forwarding: Add/Edit
The following table describes the labels in this screen.
9.5 RIP
Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing
information with other routers.
information with other routers.
Table 43
Policy Forwarding: Add/Edit
LABEL
DESCRIPTION
Policy Name
Enter a descriptive name of up to 8 printable English keyboard characters, not including
spaces.
spaces.
Source IP
Enter the source IP address.
Source Subnet
Mask
Mask
Enter the source subnet mask address.
Protocol
Select the transport layer protocol (TCP or UDP).
Source Port
Enter the source port number.
Source MAC
Enter the source MAC address.
WAN
Select a WAN interface through which the traffic is sent. You must have the WAN
interface(s) already configured in the Broadband screens.
interface(s) already configured in the Broadband screens.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.