Zebra 105925G-002 User Manual
34
Zebra P110i / P110m / P120i Card Printers Service Manual
980584-001 Rev. A
Printer Model/Firmware Version
Gives the printer model and firmware version.
Encoder Settings
Dialog box for setting Magnetic Encoder parameters. This feature is not enabled if the printer
does not have the magnetic encoder option.
does not have the magnetic encoder option.
Enable macro processing - This option will allow the user to choose the
encoding preamble.
encoding preamble.
Start of Data - Beginning of the data string for the encoder. Note that Start of Data
characters must be immediately followed by a one-digit number representing desired track
where the data will be written. Use the normal Windows default fonts.
characters must be immediately followed by a one-digit number representing desired track
where the data will be written. Use the normal Windows default fonts.
End of Data - Ending of the data string for the encoder.
Advanced Settings - Click here for more information. (see
Restore Defaults - Click here to reset the encoder settings to the default values.
HiCo/LoCo - Select the type of coercivity of magnetic stripe cards to be used. Coercivity
is a measurement of a material's resistance to being magnetized. Low coercivity material
magnetizes easier than high coercivity material.
is a measurement of a material's resistance to being magnetized. Low coercivity material
magnetizes easier than high coercivity material.
Encoder Position - Select the printer encoder position between Reversed and Normal.
Reversed is not supported by this printer.
Reversed is not supported by this printer.
Encoder Type - Select the type of encoder. JIS2 and AAMVA are not supported by
this printer.
this printer.